Summary:
Published 2026 cost guides put a new electrical outlet at about $130 to $300 installed. Angi’s national average is $300 per outlet with a typical range of $100 to $450, HomeAdvisor’s is $229 with a range of $138 to $320, and HomeGuide lists $150 to $350 with a $280 average. Replacing an outlet that is already there is cheaper: $80 to $200 at HomeGuide. The receptacle itself is only a few dollars; the price is the electrician’s time and the wiring. These are national ranges for budgeting, not a quote.
Not enough outlets is the most common complaint in older homes, and extension cords running under rugs are how people cope with it. Adding an outlet is a modest job for an electrician when there is a circuit nearby and a way to run cable; it gets more expensive when the wall is far from the panel, the circuit is full, or the outlet needs to be a special type.
This guide lays out what the national cost guides say outlet installation costs in 2026, by outlet type and by job, and what changes the price in a West Texas house. Hooked Up Electric is a licensed Texas electrical contractor with offices in Abilene, San Angelo, Midland, and Lubbock. The prices below are published ranges to help you budget. For a real number, call and tell us where the outlet goes.
Electrical Outlet Installation Cost at a Glance (2026)
Typical prices from published national cost guides.
| Item | Published range | Source |
|---|---|---|
| New outlet, installed | $100 to $450, average $300 | Angi |
| New outlet, installed | $138 to $320, average $229 | HomeAdvisor |
| New outlet, installed | $150 to $350, average $280 | HomeGuide |
| Replace an existing outlet | $80 to $200 | HomeGuide |
| Five outlets | $650 to $1,500 | Angi, HomeAdvisor |
| Ten outlets | $1,350 to $3,000 and up | Angi, HomeAdvisor |
| GFCI outlet, new | $150 to $350 | HomeGuide |
| 240V outlet (dryer, range, EV charger), new | $250 to $800 | HomeGuide |
| Outdoor outlet, installed | $180 to $350 | HomeGuide |
| USB or smart outlet, installed | $170 to $350 | HomeGuide |
| Standard receptacle, part only | $3 to $5 | Angi, HomeAdvisor |
| New wiring to the outlet | $7 to $10 per linear foot | HomeGuide |
| New dedicated circuit | $250 to $900 | HomeGuide |
| Electrician hourly rate | $50 to $100 (Angi, HomeAdvisor); $50 to $130 (HomeGuide) | Angi, HomeAdvisor, HomeGuide |
| Minimum visit or trip fee | $100 to $200 | Angi, HomeGuide |
| Permit, where required | $50 to $100 | Angi, HomeAdvisor |
| Drywall repair, if walls are opened | $300 to $900 | Angi |
Why the ranges differ: a new outlet that taps an existing circuit on the other side of the wall is a short job. One that needs cable fished across a finished room, a new circuit from the panel, or a 240-volt feed is priced by the hour and the distance. The guides also split on whether the first outlet carries the whole trip fee.
New Outlet vs. Replacing One
- Replacing an outlet. The box and wiring stay; the receptacle is swapped for a new one, a tamper-resistant one, a GFCI, or a USB outlet. HomeGuide lists $80 to $200. Worn outlets that no longer grip a plug, outlets that are warm, cracked, or discolored, and two-prong outlets are the usual reasons.
- Adding an outlet on an existing circuit. The electrician extends cable from a nearby outlet or junction box to a new box. With attic or crawl space access this is the typical $130 to $300 case.
- Adding an outlet on a new circuit. Needed for high-draw appliances, workshops, and anywhere the existing circuit is already loaded. HomeGuide lists a dedicated circuit at $250 to $900, and a full panel may push that further; see our panel upgrade cost guide.
- 240-volt outlets. Dryers, ranges, welders, RV hookups, and EV chargers need a double-pole breaker and heavier cable. HomeGuide lists $250 to $800. Our 240V outlet installation cost guide goes through each appliance.
A new outlet is also a common part of adding an electric fireplace. Our electric fireplace installation cost guide explains when a unit can plug in and when it needs its own circuit.
Outlet Types and What They Add
- Tamper-resistant. Built-in shutters block objects pushed into one slot. The Electrical Safety Foundation International notes the National Electrical Code has required them in new homes since 2008. They cost only a little more than standard receptacles.
- GFCI. Required in bathrooms, kitchens, garages, outdoors, laundry areas, and other wet locations. HomeGuide lists $150 to $350 for a new GFCI outlet and $90 to $200 to swap one into an existing box. Our GFCI outlet cost guide has the details.
- Outdoor. Weather-resistant receptacle, in-use cover, GFCI protection: $180 to $350 installed at HomeGuide. A far corner of the yard with buried conduit is a bigger project.
- USB and smart outlets. $170 to $350 installed at HomeGuide. Handy at a nightstand or kitchen counter; the part costs more than the labor difference.
- 20-amp outlets. Kitchens, bathrooms, laundry, and garages are typically on 20-amp circuits, and the receptacle has to match the circuit.
What Changes the Price in West Texas
- Distance and access. Cable from a nearby outlet through an attic is cheap. Cable across a finished ceiling under a second floor, or along a slab with no crawl space, is where the hours go. HomeGuide prices new wire at $7 to $10 per linear foot.
- Exterior walls. Brick veneer on the outside and insulation inside the wall make exterior walls slower to work in than interior partitions.
- Older wiring. Two-prong outlets on ungrounded wiring, aluminum branch wiring from the late 1960s and 1970s, or brittle cloth-insulated cable change the job. The right fix may be a GFCI, a grounded circuit, or a larger repair; our rewiring cost guide explains the options.
- Panel capacity. A new circuit needs a free breaker space. Older 100-amp panels with no spaces may need a tandem breaker, a subpanel, or an upgrade.
- Number of outlets. The trip fee and the setup are shared, so the fifth outlet costs far less than the first.
- Permits. Replacements usually need none; new circuits usually do, at $50 to $100 (Angi, HomeAdvisor). We pull it when it is required.
What an Outlet Installation Includes
On a typical visit a licensed electrician will plan the location and the circuit it will feed from, check that the circuit can take the added load, turn off and verify the circuit, cut in the new box, run and secure the cable, make the connections with the correct wire gauge and grounding, install the receptacle and cover, restore power, and test it with a plug-in tester. For a new circuit, add the breaker and the panel work, and the inspection where a permit applies.
How to Keep the Cost Down
- Add several outlets in one visit. The trip fee is paid once.
- Place new outlets back to back with existing ones or on interior walls where cable is easy to run.
- Use the attic. Tell the electrician whether the room has attic access above; it changes the quote.
- Choose the outlet type you need, not the fanciest: a standard tamper-resistant receptacle costs a few dollars.
- Bundle other work. A GFCI swap, a switch, or a breaker on the same visit costs less than separate calls. Our electrician cost guide explains how service calls are priced.
Frequently Asked Questions About Outlet Installation Costs
How much does it cost to install a new outlet?
Angi lists $100 to $450 with a $300 national average, HomeAdvisor $138 to $320 with a $229 average, and HomeGuide $150 to $350 with a $280 average. The receptacle itself is $3 to $5; the rest is labor and wiring.
How much does it cost to replace an outlet?
HomeGuide lists $80 to $200 to replace an existing outlet. Several replacements in one visit cost less each.
How much does an electrician charge per outlet?
Angi and HomeAdvisor both list $130 to $300 for one outlet, $650 to $1,500 for five, and $1,350 to $3,000 and up for ten, with hourly rates of $50 to $100 and a $100 to $200 minimum visit.
Can I add an outlet to an existing circuit?
Often, yes, if the circuit has capacity and the new location is reachable. Kitchens, bathrooms, laundry rooms, and high-draw appliances usually need their own circuits.
Do I need a permit to add an outlet in Texas?
Replacing a receptacle usually does not need one. Adding a circuit usually does, and rules vary by city; Angi and HomeAdvisor list permit fees at $50 to $100. A licensed electrician pulls it when required.
How long does it take?
HomeAdvisor notes an outlet can be installed in under an hour but electricians bill a one to two hour minimum. Fishing cable through finished walls or adding a circuit takes longer.
Need more outlets? Call 325-442-5594 or request a free quote. We work out of offices in Abilene, San Angelo, Midland, and Lubbock.
Sources: Angi, cost to install an outlet (updated October 2026); HomeAdvisor, cost to install an outlet (updated June 2026); HomeGuide, cost to install an electrical outlet (updated August 2025); Electrical Safety Foundation International, tamper-resistant receptacles.



