Safe dependable backup power for your property

Generator installation Romney, TX

Generator installation Romney, TX gives homeowners, ranches, and small businesses a reliable way to keep the lights on when the utility fails. With a properly designed system, a home standby generator in Romney, TX can automatically restore power to key circuits so refrigerators, freezers, well pumps, medical equipment, and home offices keep running while your neighbors sit in the dark.

The team at Hooked Up Electric manages every part of the project, including load calculation and sizing, fuel planning, generator pad and placement, transfer switch selection, and clean electrical panel tie in. Natural gas pressure in parts of Romney, TX can vary, so correct gas line sizing and regulator selection are critical for safety and performance. Serving homeowners across United States, we focus on code compliance, clear communication, and long term reliability. Call 325-442-5594 or get a free quote today.

A large white outdoor generator sits on a platform surrounded by greenery. It has air vents on the side and a control panel visible through a small window. A metal exhaust pipe extends upward from the unit.

Hear from Our Customers

A large, white standby generator is placed on a concrete platform next to a building with stone siding. The area is paved with interlocking bricks and a yellow pipe extends from the generator upwards.

Reliable Backup Power Done Right

What you gain with professional installation

When Hooked Up Electric designs and installs your standby system in Romney, TX, you get more than just a generator on a pad, you get a complete backup power plan. Our electricians calculate generator sizing in Romney, TX based on real household or ranch loads, then pair the right equipment with a safe transfer switch, fuel system, and wiring. The result is seamless backup power that protects HVAC, refrigeration, freezers, septic or well systems, sensitive electronics, and work from home setups.

  • Our licensed generator electrician Romney, TX team performs detailed load calculations so your unit can start and run demanding loads without strain.
  • We follow manufacturer instructions and electrical and gas codes so your investment stays safe and warranty compliant.
  • We handle permits, inspections, and coordination which reduces delays and avoids costly rework.
  • We plan generator installation near Romney, TX with careful attention to generator pad and placement, clearances, and ventilation around your home.
  • We install the right generator transfer switch, from manual options to fully automatic transfer switches and ATS installation Romney, TX.
  • We complete startup testing and homeowner orientation so you know exactly what to expect when the next outage hits.

About Hooked Up Electric

Texas standby generator experts you can trust

Hooked Up Electric is a Texas based electrical contractor focused on safe, reliable standby power solutions for homes, ranches, and small businesses. Our experienced team understands NEC and local code requirements, rural well and livestock loads, and how to design systems that keep real world properties running when the grid fails.

We proudly serve customers across United States and surrounding communities with complete electrical services. Along with generator installation, we provide circuit breaker and panel upgrades, lighting services, EV charger installation, and security lighting so your entire electrical system works together. Whether you need whole house generator installation Romney, TX or a smaller backup solution, we are the residential generator installers Romney, TX property owners can count on for friendly, professional service.

A white standby generator, expertly installed on a concrete slab outdoors, sits next to several air conditioning units. The generator installation is complemented by the surrounding greenery of grass and small plants.

How Our Generator Installation Works

From sizing to startup in four clear steps

Every project starts with a consultation and sizing visit where we walk your property in Romney, TX, listen to your priorities, and review existing electrical and gas systems. We ask which items matter most during an outage, then answer the common question, what size generator do I need in Romney, TX. From there, we calculate running and starting loads and discuss whole home versus essential circuit backup so you can choose the level of protection that fits your budget.

Next, we prepare a written proposal that spells out equipment, labor, and options in plain language. If needed, we may recommend an upgrade electrical panel for generator Romney, TX so the system can support new breakers, transfer equipment, and modern safety devices. Once you approve the plan, we obtain the permit for generator work, coordinate with your gas provider if applicable, and schedule your installation for a convenient day.

On installation day our crew arrives on time, protects work areas, and begins with generator pad and placement Romney, TX so the unit sits level, secure, and within required clearances. We mount and wire the transfer switch, install a dedicated generator breaker, and complete the electrical interconnection and panel tie in according to current code. If you choose natural gas generator installation Romney, TX or a propane unit, we size and route the gas line, regulators, and shutoffs so the fuel system is safe and reliable.

The final step is startup, testing, and homeowner orientation where we simulate a power outage, verify voltage and frequency, and check that your chosen circuits perform correctly under load. We explain how the automatic transfer switch behaves, review routine checks and exercise cycles, and answer questions about generator maintenance and service Romney, TX solutions. Before we leave, we help with warranty registration and confirm you are comfortable operating your new system.

A Generac generator installation is visible outside a building, dusted lightly with snow. The beige unit is marked "Guardian 10kW" and "Generac" in black with an orange line underneath. A wooden siding serves as the backdrop.

Ready to get started?

Explore More Services

About Hooked Up Electric

Get a Free Consultation

What Is Included With A Professional Install

Scope options and code requirements explained

A turnkey standby system from Hooked Up Electric includes every major element needed to keep your Romney, TX home or ranch powered safely during outages. We coordinate electrical, gas, and permitting details so you do not have to juggle multiple contractors or guess about code requirements, clearances, and inspections.

  • Load calculation and generator sizing ensure your system can handle chosen circuits, whether you want essential loads or whole house coverage.
  • Fuel selection and gas design can include natural gas generator installation Romney, TX or propane fuel, with correctly sized gas line for generator supply and regulators.
  • Transfer switch and subpanel choices range from manual switches to fully automatic ATS installation Romney, TX, plus optional emergency subpanels for critical circuits.
  • Electrical interconnection and surge protection provide a dedicated generator breaker, proper grounding and bonding, and optional whole home surge protection Romney, TX to help protect sensitive electronics.
  • Generator pad, placement, and trenching cover generator pad and placement Romney, TX, conduit routing, ventilation and clearances, and noise and setback considerations around your structures.
  • Permits, inspections, and coordination include securing the permit for generator work, meeting inspectors, and scheduling related upgrades like new lighting or security lighting.
  • Startup testing and homeowner orientation verify performance under load, review controls and indicators, and help complete paperwork so warranty and service support are in place.
  • Commercial and agricultural solutions are available for shops, barns, and small businesses that need dependable power for refrigeration, lighting, and equipment.
A generator installation is neatly positioned on a concrete slab outdoors, amid several air conditioning units. The area is dotted with patches of grass and dirt, while a white fence peeks through the background.

How much does generator installation cost in Romney, TX?

Cost depends on generator size, fuel type, transfer switch style, trenching, and any panel or gas upgrades. After a site visit we provide a clear written estimate so you understand backup generator installation cost Romney, TX before committing.
The right size depends on how many circuits you want to power, such as AC, well pumps, refrigeration, and electronics. We perform generator sizing in Romney, TX and recommend a home standby generator in Romney, TX that balances comfort, budget, and fuel use
Yes, we install both natural gas and propane units, depending on what is available at your property. We design the gas line for generator supply, including regulators and shutoffs, so the system is safe and code compliant.
Most permanent standby systems require electrical permits and sometimes gas permits as well. Hooked Up Electric secures the permit for generator work, coordinates inspections, and can align related upgrades like other electrical services so everything passes together.
A manual generator transfer switch requires you to operate a switch or breakers to move selected circuits from utility to generator power. An automatic transfer switch, or ATS, senses outages, starts the generator, transfers power automatically, then switches back when utility service returns.
In many cases yes, as long as the generator and wiring are sized for the higher starting currents of compressors and pump motors. We account for those loads during design so your system in Romney, TX can support critical equipment without nuisance shutdowns.