Safe dependable backup power for your property

Generator installation Caps, TX

Generator installation Caps, TX from Hooked Up Electric gives homeowners, ranches, and small businesses in Caps, TX reliable backup power when storms or grid problems shut everything down. We start every project with careful load calculation and sizing so your generator, transfer switch, gas line, and electrical connections are all matched to the real demands of your home instead of a rough guess.

Natural gas pressure in some parts of Caps, TX can fluctuate as seasonal demand changes, so our team plans gas line sizing and regulator selection to keep your standby system running smoothly. From generator pad and placement and dedicated generator breaker connections to permits, inspections, ventilation, and noise considerations, we manage every detail with safety and code compliance in mind. Serving homeowners across United States, we make it simple to protect your comfort, your food, and your equipment during an outage. Call 325-442-5594 or get a free quote today.

A large white outdoor generator sits on a platform surrounded by greenery. It has air vents on the side and a control panel visible through a small window. A metal exhaust pipe extends upward from the unit.

Hear from Our Customers

A large, white standby generator is placed on a concrete platform next to a building with stone siding. The area is paved with interlocking bricks and a yellow pipe extends from the generator upwards.

Reliable Backup Power Done Right

Whole house generator installation Caps, TX gains

Choosing Hooked Up Electric for a home standby generator in Caps, TX means your system is designed for real world conditions, not just brochure numbers. We look at HVAC units, fridges and freezers, well or booster pumps, and home office loads so your generator can carry the essentials without nuisance tripping. Our goal is simple, safe transfer switching, steady power, and the peace of mind that comes from knowing the lights and critical equipment will stay on when the grid fails.

  • We size equipment correctly instead of guessing, so generator sizing in Caps, TX supports starting currents for AC units and pumps.
  • Our licensed generator electrician Caps, TX team follows manufacturer instructions and current codes for electrical and fuel gas work.
  • You can choose between targeted coverage and broader whole house solutions depending on budget and priorities for your family.
  • We manage permits, inspections, and utility coordination so you are not stuck chasing paperwork or multiple contractors.
  • We offer automatic transfer switch installation Caps, TX as well as manual options so you can decide how hands off you want operation to be.
  • We complete full startup testing and explain generator maintenance and service Caps, TX practices so your system stays ready year round.

About Hooked Up Electric

Texas standby generator experts you can trust

Hooked Up Electric is a locally focused electrical contractor that specializes in safe, code compliant standby power systems for homes, ranches, and small commercial buildings. Our residential generator installers Caps, TX technicians understand how to tie together generators, transfer switches, gas piping, surge protection, and existing electrical panels so everything works as one dependable backup solution.

We proudly serve customers across United States and neighboring communities with complete electrical services, not just generators. Along with professional generator installation, we provide circuit breaker panel upgrades, lighting services, EV charger installation, and security lighting so your electrical system is strong every day, not just during outages. Whether you want focused essential circuits or a broader whole house solution, Hooked Up Electric is here with honest guidance and dependable work.

A white standby generator, expertly installed on a concrete slab outdoors, sits next to several air conditioning units. The generator installation is complemented by the surrounding greenery of grass and small plants.

How Our Generator Installation Works

From sizing to startup in four clear steps

The first step is consultation and sizing at your property in Caps, TX to decide what you want backed up when the power fails. We check air conditioners, refrigerators, freezers, pumps, home office and internet equipment, and any medical or special loads, then calculate your required capacity and explain essential circuits versus more complete coverage, along with fuel, noise, and placement options.

The second step is proposal, permits, and scheduling. Your written scope of work explains generator size, fuel choice, transfer switch style, wiring method, and any recommended upgrade electrical panel for generator Caps, TX improvements. We handle the permit for generator work, coordinate any new gas line for generator service, and schedule the project on a day that fits your routine and neighborhood needs.

The third step is professional installation day. We prep the site, complete generator pad and placement Caps, TX work so the unit has proper clearances and ventilation, then mount the transfer equipment and run conduit and conductors to a dedicated generator breaker. Our team can also add surge protection for sensitive electronics to help reduce risk from lightning and utility switching events.

The fourth step is startup, testing, and orientation. We simulate an outage so you can see the generator start, watch the transfer switch operate, and confirm that selected circuits power up as planned. Our technician reviews operating modes, exercises, alarms, and recommended generator maintenance and service Caps, TX intervals, helps with warranty registration, and makes sure you know what to expect the next time the lights go out in Caps, TX.

A Generac generator installation is visible outside a building, dusted lightly with snow. The beige unit is marked "Guardian 10kW" and "Generac" in black with an orange line underneath. A wooden siding serves as the backdrop.

Ready to get started?

Explore More Services

About Hooked Up Electric

Get a Free Consultation

What Is Included With A Professional Install

Scope options and code requirements

When you hire Hooked Up Electric for generator installation near Caps, TX you get more than just a unit and a pad, you get a fully engineered, code compliant system. We coordinate electrical, fuel, permitting, and testing tasks so you have one point of contact and a result you can trust for years.

  • Load calculation and generator sizing evaluate real world running and starting loads so you can choose between essential circuits and broader backup with confidence.
  • Fuel choice and gas system design cover natural gas generator installation Caps, TX or propane solutions with correctly sized gas line for generator supply, regulators, and shutoff valves.
  • Transfer switch and control options include manual selector devices and automatic transfer switch installation Caps, TX so you can pick the level of automation that fits your lifestyle.
  • Electrical interconnection and protection provide a dedicated generator breaker, proper grounding and bonding, and surge protection options to help safeguard appliances and electronics.
  • Generator pad and placement Caps, TX address site preparation, concrete or composite pad installation, clearances, ventilation, and noise orientation for your home and neighbors.
  • Permits, inspections, and coordination ensure the permit for generator work is obtained, inspections are scheduled, and related improvements like panel upgrades or new lighting are handled if needed.
  • Startup testing and homeowner orientation include simulated outage tests, homeowner training on controls and maintenance, and help with warranty registration paperwork.
  • Residential and light commercial solutions extend from single family homes to small offices, shops, and ag buildings that need dependable power to protect inventory and operations.
  • Future ready electrical enhancements can combine generator projects with EV charger installation and security lighting upgrades for a safer and more convenient property.
A generator installation is neatly positioned on a concrete slab outdoors, amid several air conditioning units. The area is dotted with patches of grass and dirt, while a white fence peeks through the background.

How much does generator installation cost in Caps, TX?

Costs vary based on generator size, fuel type, gas line work, transfer switch style, and any electrical upgrades required at your panel. After an on site visit, we provide a clear written estimate so backup generator installation cost Caps, TX is straightforward before you decide.
The right size depends on how many air conditioners, pumps, kitchen appliances, and other loads you want to run at the same time. We perform detailed generator sizing in Caps, TX during our consultation and help you choose between essential circuit coverage and broader whole house protection.
Yes, we work with both natural gas and propane fueled standby units for homes and small businesses. Our team designs the gas line for generator supply with correct sizing and regulators and coordinates with your gas provider when necessary.
Most permanent standby systems require one or more permits to meet local electrical and fuel gas codes. Hooked Up Electric secures the permit for generator work, schedules inspections, and manages related tasks so the process is as simple as possible for you.
A manual generator transfer switch requires you to operate a handle or breakers to move selected circuits onto generator power during an outage. An automatic transfer switch, or ATS, senses power loss, starts the generator, transfers the load automatically, and then returns to utility power once it is stable.
Often it can, as long as the generator and wiring are sized for the higher starting current of those motors. During design we account for those loads so a home standby generator in Caps, TX can keep your water and cooling running without frequent overloads.